The Q12 2 Post Automotive Lift model provides symmetric and asymmetric lifting capabilities for both cars and trucks. ALI/ETL certified. Model Q12 – 12,000 lb Lifting Capacity.
Two stage front arms
Telescoping adapter pads
|Specifications – Model Q12|
|Lifting Capacity *||12,000 lb(5433 kg)|
|Rise Height||78 1/8″ (1984 mm)|
|Adj. Height Overall||13′ 10″ to 14′ 7″ (4216 mm or 4445 mm)|
|Width Overall||11′ 7 3/4″ (3550 mm)|
|Drive-thru Clearance||103″ (2616 mm)|
|Floor to Overhead Switch||13′ 3 1/2″ to 14′ 1/2″ (4061 mm to 4280 mm)|
|Minimum Arm Reach||Min. 35 3/4″ (910 mm)|
|Maximum Arm Reach||Max. 54 1/2″ (1386mm)|
|Screw Pad Height||5 1/4″ to 7 1/4″ (133 mm to 184 mm)|
|Inside Columns||115″ (2921 mm)|
|Motor||2 HP, Single Phase, 60 Hz|
|Ceiling Height Required||13′ 11″ or 14′ 8″ (4470 mm)|
|Speed of Rise **||66 Seconds|
|Max Load per Arm||3000 lbs. (1360 kg)|
| * Lift capacity ratings are based on loads equally distributed on all four arms
** Lifting and lowering speeds may vary depending on the weight of the vehicle
Knowledgable and experienced Project Managers provide expert advice.
You’re never alone with our worldwide network of Installers and Service Technicians.
American Custom Lifts has been serving the lift industry for over 20 Years.
American Custom Lifts has dedicated project managers ready to assist you and answer your questions. Let us do the heavy lifting. Contact us today!